Flyballequip.com - prebuilt flyball boxes, ball thrusters, jumps, sintra and equipment plans.........................................................

| HOME |

| FLYBALL BOXES |
| FLYBALL JUMPS | | SINTRA SLATS | | THRUSTERS |
| PLANS |
| ABOUT US |
| ORDERING INFO |
| CONTACT US |

Flyball Equipment Plans

New Flyball Box plans are finally completed and are avalaible for ordering.
This new box is very high quality, competition grade 2 & 4 hole box kit/plan design.

Longer pedal, updated geometry and a refined, very compact "TIG welded" steel thruster.
Please e-mail for more details.

2 Hole Vertical Front Box with Ball Thrusters

This 2 hole flyball box is intended for an individual or team on a budget to produce a very good quality 2 hole vertical front box that incorprates the use of an all metal ball thruster.

To keep total build cost as low as possible the ball thrusters have been downgraded from a machined alumunum exo-skeleton to a TIG welded steel frame. These ball thrusters have the same functionality as my aluminum ball thruster they just a bit easier to fabricate and they are more compact.

A handy person with some basic wood working tools and a bit of flyball box knowledge should be able to build this box in a weekend.

Box features:

  • 24" wide, 17-7/8" high, 29" long.
  • 15-3/4" front pedal.
  • Two (2) steel ball thrusters painted black.
  • Removable Ball face
  • Simplified pedal de-latch mechinism.
  • Adjustable ball speed.
  • Adjustable sensitivity.
  • Large side cutouts for box carrying.
  • Box loader platform.
  • Shin padding.
  • +/- 40lbs.

The Flyball Box Construction kit includes:

  • 2 TIG welded Steel thrusters with light weight aluminum thrust shafts,
  • 2 Pedal delatch arms,
  • Springs,
  • Necessary mounting brackets,
  • All the nuts, bolts and washers,
  • 5 sheets of drawings,
  • Parts list,
  • Cut list,
  • Thoughts behind flyball box and box design,
  • 125+ Full resolution pictures (on CD ROM)
  • Step-by-step construction notes/pictures (on CD ROM)
  • Videos to tune/adjust the box (on CD ROM)

All you need to purchase extra is the wood, wood screws, rubber, glue and a hinge (~$90-$100) (These are the bulky items that are heard to ship)

\........< a sample of a high resolution picture >

.........< Click here for a sample of the plans >

 

 


 



........... ...........

 

These tools will be needed:
table saw, jig saw, drill, hole saw, wrenches, screw drivers, measuring tape, utility knife.


Please note: Even though these plans show you how to build a box by step-by-step instructions, basic woodworking and flyball box knowledge is required.

This 2 Hole Plan Box is slightly different in design and features than the pre-built Flyball Boxes that are found on this website. They are similar in concept however this plan box has some subtle differences to help simplify the construction process.

Pricing

2 hole vertical front flyball box with plans and parts kit is: $295.00CAN.

** Please note: shipping is not included.

For an estimated currency exchange rate, please refer to : www.xe.com

 
Free Flyball Equipment Plans
The free information below is intended for personal use only
Free VERY Basic 2 hole Flyball Box Plans
Free Plywood Jumps Plans
Free Learning to Pass Jump Plans
Free Box Jump Plans
Free Practice Height Stick (Measuring Wicket) Plans
Free Snow Fencing Holder
Free Skid Boot Plans

 

 

 



Copyright © 2009. All Rights Reserved - Last updated on March 11th, 2009
- anti spam replace (at) with @ - E-mail: mike(at)flyballequip.com